Biodegradable reactive compatibilizers for efficient in-situ compatibilization of poly (lactic acid)/poly (butylene adipate-terephthalate) blends.

The wide application of fully biodegradable polylactic acid/polybutylene terephthalate (PLA/PBAT) blends in environmentally friendly packaging were limited because of poor compatibility. Normal compatibilizers suffer from poor thermal stability and non-biodegradability. In this work, epoxy copolymer (MDOG) with different molecular structures were made of 2-methylene-1, 3-dioxoheptane, and glycidyl methacrylate as raw materials by free radical copolymerization. MDOG copolymers have good biodegradability and a high thermal decomposition temperature of 361 °C. The chemical reaction of the epoxy groups in MDOG with PLA and PBAT during the melting reaction improved the interfacial bonding by decreasing the particle size of PBAT. Compared to the PLA/PBAT blends, the tensile strength and fracture toughness of PLA/PBAT/MDOG blends were enhanced to 34.6 MPa and 115.8 MJ/m3, which are 25 % and 81 % higher, respectively. As a result, this work offers new methods for developing thermally stable and biodegradable compatibilizers, which will hopefully promote the development of packaging industry.

Thermal- and pH-responsive triple-shape memory hydrogel based on a single reversible switch.

Here we provide a novel method for fabricating a pH- and thermal-responsive triple-shape memory hydrogel based on a single reversible switch phase. A high-density quadruple hydrogen-bonding ureido-pyrimidinone (UPy) system was introduced into the hydrogel network, which can occur to varied degrees of dissociation under different pH and temperature conditions. Different degrees of dissociation and reassociation can be viewed as different subsets of memory elements to freeze and unfreeze the temporary shapes. Although this class of hydrogels contains only a single transition phase, they feature a large dissociative differential in response to varied external stimuli to provide multiple windows for programming different temporary shapes.

Trifluoromethyl-Functionalized 2D Covalent Organic Framework for High-Resolution Separation of Isomers.

Development of novel functional materials for effective isomer separation is of great significance in environmental science, chemical industry, and life science due to the different functions of isomers. However, the similar physicochemical properties of isomers make their separation greatly challenging. Here, we report the fabrication of trifluoromethyl-functionalized 2D covalent organic framework (COF) TpTFMB with 2,2'-bis(trifluoromethyl)benzidine (TFMB) and 1,3,5-triformylphloroglucinol (Tp) for the separation of isomers. TpTFMB was in situ-grown on the inner surface of a capillary for the high-resolution separation of isomers. The introduction of hydroxyl and trifluoromethyl functional groups with uniform distribution in 2D COFs is a powerful tactic to endow TpTFMB with various functions such as hydrogen bonding, dipole interaction, and steric effect. The prepared TpTFMB capillary column enabled the baseline separation of positional isomers such as ethylbenzene and xylene, chlorotoluene, carbon chain isomers such as butylbenzene and ethyl butanoate, and cis-trans isomers 1,3-dichloropropene. The hydrogen-bonding, dipole, and π-π interactions as well as the structure of COF significantly contribute to the isomer separation. This work provides a new strategy for designing functional 2D COFs for the efficient separation of isomers.

Mesoporous polyacrylic acid/calcium phosphate coated persistent luminescence nanoparticles for improved afterglow bioimaging and chemotherapy of bacterial infection.

Coating mesoporous drug carriers on the surface of persistent luminescence nanoparticles (PLNPs) not only allows continuous luminous imaging without spontaneous fluorescence interference, but also provides drug release guidance. However, in most cases, the encapsulation of the drug-loaded shells significantly reduces the luminescence of PLNPs, which is unfavorable for bioimaging. In addition, conventional drug-loaded shells alone, such as silica shells, have difficulty in achieving responsive fast drug release. Herein, we report the fabrication of mesoporous polyacrylic acid (PAA)/calcium phosphate (CaP) shell-coated PLNPs (PLNPs@PAA/CaP) for improved afterglow bioimaging and drug delivery. The encapsulation of the PAA/CaP shell effectively prolonged the decay time and enhanced the sustained luminescence of PLNPs by about three times due to the passivation of the surface defects of PLNPs by the shell, and the energy transfer between the shell and PLNPs. Meanwhile, the mesoporous structure and negative charge of the PAA/CaP shells enabled the prepared PLNPs@PAA/CaP to carry the positively charged drug doxycycline hydrochloride efficiently. Under the acidic conditions of bacterial infection, the degradation of PAA/CaP shells and the ionization of PAA enabled fast drug release for effective killing of bacteria at the infection site. The excellent persistent luminescence properties, outstanding biocompatibility, and rapid responsive release feature make the prepared PLNPs@PAA/CaP a promising nanoplatform for diagnostic and therapeutic applications.

Highly toughened poly (lactic acid)/poly (butylene adipate-terephthalate) blends in-situ compatibilized by MMA-co-GMA copolymers with different epoxy group content.

Poor compatibility limits the wide application of biodegradable poly (lactic acid)/poly (butylene adipate-terephthalate) (PLA/PBAT) blends in packaging industry. How to prepare compatibilizers with high efficiency and low cost by simple methods is a challenge. In this work, methyl methacrylate-co-glycidyl methacrylate (MG) copolymer with different epoxy group content are synthesized as reactive compatibilizers to resolve this issue. The effects of glycidyl methacrylate and MG contents on phase morphology and physical properties of the PLA/PBAT blends are systematically investigated. During melt blending, MG migrates to the phase interface, and then grafts with PBAT to form PLA-g-MG-g-PBAT terpolymers. When the molar ratio of MMA and GMA in MG is 3:1, the reaction activity of MG with PBAT is the highest and the compatibilization effect is the best. When the M3G1 content is 1 wt%, the tensile strength and the fracture toughness are increased to 37. 1 MPa and 120 MJ/m3, which increase by 34 % and 87 %, respectively. The size of PBAT phase decreases from 3.7 µm to 0.91 µm. Therefore, this work provides a low-cost and simple method to prepare the compatibilizers with high efficiency for the PLA/PBAT blend, and provides a new basis for the design of epoxy compatibilizers.

Cicada-Wing-Inspired Highly Sensitive Tactile Sensors Based on Elastic Carbon Foam with Nanotextured Surfaces.

Electronic devices with tactile and pressure-sensing capabilities are becoming increasingly popular in the automatic industry, human motion/health monitoring, and artificial intelligence applications. Inspired by the natural nanotopography of the cicada wing, we propose here a straightforward strategy to fabricate a highly sensitive tactile sensor through nanotexturing of erected polyaniline (PANI) nanoneedles on a conductive and elastic three-dimensional (3D) carbon skeleton. The robust and compressible carbon networks offer a resilient and conducting matrix to catering complex scenarios; the biomimetic PANI nanoneedles firmly and densely anchored on a 3D carbon skeleton provide intimate electrical contact under subtle deformation. As a result, a piezoresistive tactile sensor with ultrahigh sensitivity (33.52 kPa-1), fast response/recovery abilities (97/111 ms), and reproducible sensing performance (2500 cycles) is developed, which is capable of distinguishing motions in a wide pressure range from 4.66 Pa to 60 kPa, detecting spatial pressure distribution, and monitoring various gestures in a wireless manner. These excellent performances demonstrate the great potential of nature-inspired tactile sensors for practical human motion monitoring and artificial intelligence applications.

Enhanced crystallization, heat resistance and transparency of poly(lactic acid) with self-assembling bis-amide nucleator.

The application of poly(lactic acid) (PLA) is limited by its low crystallization rate. Conventional methods to increase crystallization rate usually result in a significant loss of transparency. In this work, a bundled bis-amide organic compound N'-(3-(hydrazinyloxy)benzoyl)-1-naphthohydrazide (HBNA) was used as a nucleator to prepare PLA/HBNA blends with enhanced crystallization, heat resistance and transparency. HBNA dissolves in PLA matrix at high temperature and self-assembles into bundle microcrystals by intermolecular hydrogen bonding at a lower temperature, which induces PLA to form ample spherulites and "shish-kebab-like" structure rapidly. The effects of HBNA assembling behavior and nucleation activity on the PLA properties and the corresponding mechanism are systematically investigated. As a result, the crystallization temperature of PLA increased from 90 °C to 123 °C by adding as low as 0.75 wt% of HBNA, and the half-crystallization time (t1/2) at 135 °C decreased from 31.0 min to 1.5 min. More importantly, the PLA/HBNA maintains good transparency (transmittance > 75 % and haze is ca. 27 %) due to the decreased crystal size, even though the crystallinity of PLA is increased to 40 %, which also led to good heat resistance. The present work is expected to expand the application of PLA in packaging and other fields.

Enhanced flame retardancy and toughness of eco-friendly polyhydroxyalkanoate/bentonite composites based on in situ intercalation of P-N-containing hyperbranched macromolecules.

Polyhydroxyalkanoates (PHA) is a biodegradable polyester, and its application range is limited by the poor flame retardancy and low modulus. Bentonite (BNT) as a green inorganic filler can improve the modulus and flame retardancy of PHA to a certain extent. An in situ polymerization method was designed to intercalate P-N-containing hyperbranched macromolecules (HBM) among BNT layers (HBM-B) and to improve the flame retardancy while improving the dispersion of BNT in the PHA matrix. The layer spacing of BNT was increased from 1.2 nm to 4.5 nm. The effect law of the joint action of in situ intercalation of BNT and the HBM on flame retardancy and mechanical properties of PHA was systematically studied. The HBM-B showed stronger flame retardancy when the mass ratio of HBM to BNT was 75/25. The limiting oxygen index (LOI) of the PHA/HBM-B composite was increased to 27.6 % while maintaining good toughness. Compared to the physical blend of HBM and BNT (HBM/B), the elongation at break of PHA/HBM-B25 composites can be increased by up to 10 times. When the content of HBM-B is up to 15 wt%, the LOI of PHA-Based composites can reach 29.6 % and the UL-94 rating reaches V-0, which meets the standard of flame-retardant material. Therefore, the present work is expected to expand the application of PHA-based composites in the field of flame retardancy.

A Quantitative Study on Branching Density Dependent Behavior of Polylactide Melt Strength.

Polymer melt strength (MS) is strongly correlated with its molecular structure, while their relationship is not very clear yet. In this work, designable long-chain branched polylactide (LCB-PLA) is prepared in situ by using a tailor-made (methyl methacrylate)-co-(glycidyl methacrylate) copolymer (MG) with accurate number of reactive sites. A new concept of branching density (φ) in the LCB-PLA system is defined to quantitively study their relationship. Importantly, a critical point of φc  = 5.5 mol/104  mol C is revealed for the first time, below which the zero-shear viscosity (η0 ) corresponding to MS increases slowly with a slope of Δη0 /Δφ = 1400, while it increases sharply above this critical point due to entanglement of neighboring LCB-PLA chains. Consequently, the MS of PLA increased by >100 times by optimizing the LCB structures while maintaining processibility. Therefore, this work provides a deeper understanding and feasible route in quantitative design of polymers with high(er) melt strength for some specialty applications.

Quasi-Homogeneous and Hierarchical Electronic Textiles with Porosity-Hydrophilicity Dual-Gradient for Unidirectional Sweat Transport, Electrophysiological Monitoring, and Body-Temperature Visualization.

On-skin electronics based on impermeable elastomers and stacking structures often suffer from inferior sweat-repelling capabilities and severe mechanical mismatch between sub-layers employed, which significantly impedes their lengthy wearing comfort and functionality. Herein, inspired by the transpiration system of vascular plants and the water diode phenomenon, a hierarchical nonwoven electronic textile (E-textile) with multi-branching microfibers and robust interlayer adhesion is rationally developed. The layer-by-layer electro-airflow spinning method and selective oxygen plasma treatment are utilized to yield a porosity-hydrophilicity dual-gradient. The resulting E-textile shows unidirectional, nonreversible, and anti-gravity water transporting performance even upon large-scale stretching (250%), excellent mechanical matching between sub-layers, as well as a reversible color-switching ability to visualize body temperature. More importantly, the conducting and skin-conformal E-textile demonstrates accurate and stable detecting capability for biomechanical and bioelectrical signals when applied as an on-skin bioelectrode, including different human activities, electrocardiography, electromyogram, and electrodermal activity signals. Further, the E-textile can be efficiently implemented in human-machine interfaces to build a gesture-controlled dustbin and a smart acousto-optic alarm. Hence, this hierarchically-designed E-textile with integrated functionalities offers a practical and innovative method for designing comfortable and daily applicable on-skin electronics.

Perspiration-Wicking and Luminescent On-Skin Electronics Based on Ultrastretchable Janus E-Textiles.

Stretchable electronics have attracted surging attention for next-generation smart wearables, yet traditional flexible devices fabricated on hermetical elastic substrates cannot satisfy lengthy wearing comfort and signal stability due to their poor moisture and air permeability. Herein, perspiration-wicking and luminescent on-skin electrodes are fabricated on superelastic nonwoven textiles with a Janus configuration. Through the electrospin-assisted face-to-face assembly of all-SEBS microfibers with differentiated diameters and composition, porosity and wettability asymmetry are constructed across the textile, endowing it with antigravity water transport capability for continuous sweat release. Also, the phosphor particles evenly encapsulated in the elastic fibers empower the Janus textile with stable light-emitting capability under extreme stretching in a dark environment. Additionally, the precise printing of highly conductive liquid metal (LM) circuits onto the matrix not only equips the electronic textile with broad detectability for various biophysical and electrophysiological signals but also enables successful implementation of human-machine interface (HMIs) to control a mechanical claw.

A photothermally triggered one-component shape memory polymer material prepared by cross-linking porphyrin-based amphiphilic copolymer self-assemblies.

Photothermally triggered shape memory polymer materials are usually prepared by dispersing photothermally responsive fillers or compounds into shape memory polymer matrixes through physical blending, while the migration and non-biodegradability of the fillers limit their potential applications (e.g., in the biomedical field). Here, we synthesized a new type of porphyrin-based amphiphilic random copolymer bearing a reactive moiety of carbonyl group by co-polymerizing methyl methacrylate (MMA), butyl acrylate (BA), diacetone acrylamide (DAAM), acrylic acid (AA) and double-bonded vinyl porphyrin monomers, followed by induced self-assembly in aqueous solution to give rise to amphiphilic random copolymer nanoparticles. The nanoparticles were further crosslinked by means of adipic dihydrazide (ADH) to fabricate the photothermally triggered one-component shape memory polymer material. Compared with the most-studied multi-phase/multi-component shape memory polymer materials, the porphyrin moiety, playing the role of a photo-to-heat converter, covalently bonded into the polymer structure would certainly make it more homogeneous and more stable in principle.

Enhanced crystallization and storage stability of mechanical properties of poly(hydroxyalkanoate)s in the presence of hydrazide compounds with different configurations.

Slow crystallization rates and poor storage stability of mechanical properties limit the widespread use of biosynthesized poly(hydroxyalkanoate)s (PHA). Hydrazide compounds (HCn) with a formula of C6H5CONHNHCO(CH2)nCONHNHCOC6H5 (n = 4 and 8) were used as PHA nucleating agents to improve the crystallization and mechanical properties. The effects of HCn structure and self-assembly on the crystallization kinetics and nucleation efficiency of PHA were systematically investigated. Both HCns can be dissolved in the PHA matrix at high temperatures and then self-assemble into rod-like structures to induce crystallization of PHA. The nucleation efficiency of HC8 is much better than that of HC4 at low subcooling. With only 0.75 wt% HC8, the crystallization half-life time t1/2 of PHA at 100 °C decreased by 91 % and the degree of crystallinity increased to 38.2 % with a large number of tiny nuclei. Moreover, storage stability of mechanical properties of PHA was greatly improved due to the better crystallization ability. Therefore, this work provides a basis for the design of high-efficiency nucleating agents for PHA, which is expected to improve the mechanical properties and expand the application fields of PHA.

Xylem-Inspired Polyimide/MXene Aerogels with Radial Lamellar Architectures for Highly Sensitive Strain Detection and Efficient Solar Steam Generation.

Polyimide aerogels with mechanical robustness, great compressibility, excellent antifatigue properties, and intriguing functionality have captured enormous attention in diverse applications. Here, enlightened by the xylem parenchyma of dicotyledonous stems, a radially architectured polyimide/MXene composite aerogel (RPIMX) with reversible compressibility is developed by combining the interfacial enhancing strategy and radial ice-templating method. The strong interaction between MXene flakes and polymer can glue the MXene to form continuous lamellae, the ice crystals grow preferentially along the radial temperature gradient can effectively constrain the lamellae to create a biomimetic radial lamellar architecture. As a result, the nature-inspired RPIMX composite aerogel with centrosymmetric lamellar structure and oriented channels manifests excellent mechanical strength, electrical conductivity, and water transporting capability along the longitudinal direction, endowing itself with intriguing applications for accurate human motion monitoring and efficient photothermal evaporation. These exciting properties make the biomimetic RPIMX aerogels promising candidates for flexible piezoresistive sensors and photothermal evaporators.

Unraveling the electronegativity-dominated intermediate adsorption on high-entropy alloy electrocatalysts.

High-entropy alloys have received considerable attention in the field of catalysis due to their exceptional properties. However, few studies hitherto focus on the origin of their outstanding performance and the accurate identification of active centers. Herein, we report a conceptual and experimental approach to overcome the limitations of single-element catalysts by designing a FeCoNiXRu (X: Cu, Cr, and Mn) High-entropy alloys system with various active sites that have different adsorption capacities for multiple intermediates. The electronegativity differences between mixed elements in HEA induce significant charge redistribution and create highly active Co and Ru sites with optimized energy barriers for simultaneously stabilizing OH* and H* intermediates, which greatly enhances the efficiency of water dissociation in alkaline conditions. This work provides an in-depth understanding of the interactions between specific active sites and intermediates, which opens up a fascinating direction for breaking scaling relation issues for multistep reactions.

Crystallization of microbial polyhydroxyalkanoates: A review.

Polyhydroxyalkanoates (PHAs), produced by the microbial fermentation, is a promising green polymer and has attracted much attention due to its excellent biocompatibility, complete biodegradability, and non-cytotoxicity. The physical properties of PHAs are closely related to their chemical and crystalline structure. Therefore, deep understanding and regulating the structure and crystallization of PHAs are the key factors to improve the performance of PHAs. This review first provides a brief overview of the development history, chemical structure, and basic properties of PHAs. Then, the crystal structure, crystal morphology, kinetics theories and crystallization behavior of nucleation-induced PHAs are systematically summarized to provide a theoretical foundation for improving PHAs crystallization rate and physical properties. In the end, the outlook on the crystallization and application prospects of PHAs is also addressed.

Corrosion-Resistant Graphene-Based Magnetic Composite Foams for Efficient Electromagnetic Absorption.

Designing and fabricating high-performance microwave absorption materials with efficient electromagnetic absorption and corrosion resistance becomes a serious and urgent concern. Herein, novel corrosion-resistant graphene-based carbon-coated iron (Fe@C) magnetic composite foam is fabricated via self-assembly of iron phthalocyanine/Fe3O4 (FePc hybrid) on the graphene skeletons under solvothermal conditions and then annealing at high temperature. As a result, the rational construction of a hierarchical impedance gradient between graphene skeletons and Fe@C particles can facilitate the optimization in impedance matching and attenuation characteristic of the foam, realizing the efficient dissipation for incident electromagnetic waves. Additionally, the performance of electromagnetic absorption can be controllably regulated by optimizing annealing temperature and/or time. More importantly, the formation of a carbon-coated iron structure substantially improves the corrosion resistance of magnetic particles, endowing the composite foam with excellent stability and durability in microwave absorption performance.

Design of Intrinsically Flame-Retardant Vanillin-Based Epoxy Resin for Thermal-Conductive Epoxy/Graphene Aerogel Composites.

Vanillin, as a lignin-derived mono-aromatic compound, has attracted increasing attention due to its special role as an intermediate for the synthesis of different biobased polymers. Herein, intrinsically flame-retardant and thermal-conductive vanillin-based epoxy/graphene aerogel (GA) composites were designed. First, a bifunctional phenol intermediate (DN-bp) was synthesized by coupling vanillin with 4, 4'-diaminodiphenylmethane and DOPO, and the epoxy monomer (MEP) was obtained by the epoxidation reaction with DN-bp and epichlorohydrin. Then, various amounts of MEP and diglycidyl ether of bisphenol A (DER) were mixed and cured. Interestingly, the flexural strength and modulus were greatly enhanced from 72.8 MPa and 1.3 GPa to 90.3 MPa and 2.8 GPa, respectively, at 30 wt % MEP, due to the rigidity of MEP and strong intermolecular N-H hydrogen bonding interactions. Meanwhile, the cured epoxy achieved a UL-94 V0 rating with a low P content of 1.06%. The flame-retardant vanillin-based epoxy was then impregnated into the thermal conductive 3D GA networks. The obtained epoxy/graphene composite showed excellent flame retardancy and thermal conductivity [λ = 0.592 W/(m·K)] with only 0.5 wt % graphene in the system. Based on these results, we believe that this work would represent a novel solution for the preparation of high-performance biobased flame-retardant multipurpose epoxies.

Highly-toughened PVA/nanocellulose hydrogels with anti-oxidative and antibacterial properties triggered by lignin-Ag nanoparticles.

In this study, Ag nanoparticles were firstly reduced on the surface of lignin nanoparticles (LNPAg) by direct reaction of silver nitrate without the use of a catalyst. Thermogravimetric analysis, Zeta potential and transmission electron microscopy measurements were performed to give evidence of the effectiveness of the reaction. After that, glutaraldehyde crosslinked PVA hydrogels, were produced by addition of unmodified LNP and Ag loaded LNP (LNPAg) in presence of cellulose nanocrystals (CNC). Thermal, mechanical, rheological, microstructural and biological anti-oxidative and anti-bacterial properties of the resulted hydrogels were investigated. It was proved that all the three nanofillers were homogeneously dispersed in PVA, and the pore diameter of the hydrogels was in the range of 0.5-2.0 µm. Nevertheless, the hydrogels showed high toughness, long-term and repeatable adhesiveness to a variety of substrates. In particular, composite hydrogels containing LNPAg nanoparticles showed excellent radical scavenging and antibacterial activities. Consequently, the effects of PVA-2CNC-2LNPAg on wound healing in mice model of full-thickness skin resection were evaluated by hematoxylin and eosin staining, taking as a reference the PVA-2CNC-2LNP system. The results showed that the wound healing time of PVA-2CNC-2LNPAg group was faster than that of neat PVA and PVA-2CNC, highlighting the role of LNPAg in enhancing the contact-active anti-oxidative and antibacterial activities mechanism in composite hydrogels. We expected that PVA hydrogels incorporating LNPAg could be used as green and efficient biomedical wound dressing materials.

Polyimide Nanofiber-Reinforced Ti3C2Tx Aerogel with "Lamella-Pillar" Microporosity for High-Performance Piezoresistive Strain Sensing and Electromagnetic Wave Absorption.

Assembling two-dimensional MXenes into 3D macroscopic structures is an applicable method to give full play to its excellent electrical and mechanical properties toward multi-functionality. Considering the weak interfacial interaction and poor gelation ability of MXenes, short polyimide nanofibers (PINFs) are utilized as cross-linking and supporting building blocks in this work to construct a lightweight, robust, and elastic PINF/Ti3C2Tx MXene composite aerogel (PINF/MA) via a simple synergistic assembly strategy. Taking advantage of its unique 3D "lamella-pillar" microporous architecture, the designed PINF/MA composite aerogel exhibits excellent piezoresistive sensing performance in terms of a wide pressure range of 0-8 kPa (50% strain), a high piezoresistive sensitivity of 22.32 kPa-1, an ultra-low detection limit of 0.1% strain, and great compression/rebound stability (signal remained stable after 1500 cycles). These remarkable piezoresistive sensing properties enable the PINF/MA with intriguing capability to detect small and large human activities in real time (wrist and finger bending, pulse, and vocal cord vibration). More interestingly, the parallelly aligned leaf vein-like lamellae also empower the PINF/MA with prominent wave absorption performance [RLmin is -40.45 dB at 15.19 GHz, with an effective absorption bandwidth of 5.66 GHz (12.34-18 GHz)], making the multi-functional PINF/MA composite aerogels promising candidates for wearable strain sensors and microwave absorbers.